[Gigabit Uplink] 18Port POE Switch, 16 Port 100Mbps PoE+/ 2 Gig Up-link Ports/ 1 Fiber SFP Port, 802.3af/at Unmanaged 300W Built-in Power, Extend Function, Metal, 19" Rackmount Plug and Play
User Manual: Download
About This Item
19 PORT 300W POE
Transmit network data and power at the same time with a total of 300W POE power output, Up to 30W for single-port power.
The 19port fast PoE switch has two 10/100/1000 Mbps uplink ports. 1.8 Gbps switching capacity.
Power detection function, automatic detection device, compatible with non-POE devices to provide data connection.
RELIABLE FANLESS METAL HOUSING
Fanless design provides a quiet and noise-free environment.
EASY TO INSTALL
Plug and play, and farewell to the complex settings.
Smart TV, PoE devices, IP Cameras, Access Points, Projectors, Laptop, etc.
And the ports are isolated from each other improving network security.
Extend the maximum PoE transmission distance from 300ft to 800ft at a speed of 1/10Mbps.
100% SATISFACTION GUARANTEE
30-day money back guarantee with 1-year warranty and lifetime technical support.
Auto Detect Device
Easy to Deploy & Widely Used
Brilliant PoE Power Supply
250m & VLAN support
|Automatically identify PoE devices used for power supply without damaging non-PoE devices.
|Easy to use, no configuration, just plug and play, strong compatibility, automatic connection with the device, no IT experts or complicated user manuals.
|It complies with the IEEE 802.3af / at PoE power supply standard, and has higher compatibility.
|In normal mode, all ports can communicate freely and are suitable for normal data transmission.
|When the port is connected to a non-POE device that does not require power, the power of the port can be automatically turned off, which can protect the non-POE device from damage.
|It is suitable for families, businesses, finance, government agencies, hotels, shopping malls, campuses and hospitals to build cost-effective networks.
|It can supply power to all PoE devices that support this standard.
|When the extended mode designed for the monitoring solution is enabled, a single POE port supports up to 820ft transmission distances and 10 Mbps rate, which effectively improves the interference and mosaic phenomenon in the monitoring network.
|All ports support auto-flip and self-negotiation.
|It can be installed in a 19-inch rack in two ways: one is to connect the two in series with the middle screwed on the ear, and the other is to place the switch on a rack tray or other switch.
|The maximum PoE output power of the entire switch is 300W, and the maximum PoE output power of a single port is 30W, which can support more high-power devices, such as high-power IP cameras, wireless APs, and thin clients.
|At this time, all PoE ports support isolation. Suppress broadcast storms and improve network security.
16 POE+ Ports - Max Total POE+ Power of 300W
Assign a total of 300W POE+ power across all ports based on the device connected. If connecting 16 cameras requiring 15.4W each, 300W power will be split equally to 16 ports.
High Power POE+ Port on Port 1
The POE+ features a special design with Hi-POE+ on port 1, allowing up to 300W of POE+ power on a single port - ideal for high power devices such like IP PTZ cameras.
Note: Total power of all 16 ports cannot exceed 300W.
2 Uplink Ports
The POE+ has an extra uplink port, making network setups easier and more convenient. With one uplink port connected to the router, the other uplink can be connected to another POE+ switch, a NVR, or any non-POE+ equipment, allowing you to save a port on your main router / switch.
Toll-free Tech Support
Built to high heat tolerances, the switch provides reliable power without making a noise.
In addition to the 30-days no-questions-asked refund policy, we also offer a US-based standard service that covers replacement.
Our technicians are ready to help at our customer support, 9:00AM to 5:00PM Eastern time Monday to Friday, and via Amazon message during after-hours and weekends.
16 POE ports at 10/100Mbps each, making network setups easier and more convenient.
Supports desktop or wall mount placement
Fanless design means zero added noise no matter where it is installed, making it the number one choice for noise sensitive environments
Note:This product requires power, and provide power for PoE devices.Do not support passive PoE device
Port of RJ45: 16 port
POE Port: 16port
Port type:RJ45 adaptive
Cable type: CAT5 or better
Backplane Data bandwidth: 1.8GB
Transfer mode: Full-Duplex or Half-Duplex adaptive
Addressing: 48 bit MAC address
Mac Address Table: 1K
Network delay: 100Mbps to
100Mbps,less than 20ms under 64byte frame
Single port: 15.4W/30W
Max Power:300W Serials
Maximum power distance with CAT5 UTP;100meters.
8.46 * 4.17 * 0.98 inch
POE Power Budget & Switch Capacity
This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 30 W PoE power budget that transmit data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 16-port fast Ethernet PoE+ network switch provides 1.8 Gbps switching capacity to support edge network installations.
OOSSXX PoE switch has a professional lightning protection design. The port and power lightning protectors are designed with two levels of protection, which can effectively suppress the lightning of cables, which provides security protection for the whole network monitoring system.
Support power detection function, automatic detection device, compatible with non-POE devices to provide data connection.
Reliable Fanless Metal Housing
The metal housing design allows the POE switch to be used reliably in different applications. Fanless design provides a quiet and noise-free environment.
Easy to Install
Each port supports 1/10/100m rate adaptation. Duplex mode automatic negotiation, support for wire speed forwarding, plug and play, farewell to the complex settings. Just insert power cord, directly connecting the Ethernet cable to your device, and then you can enjoy your time without configuration.
Product Dimensions:8.5 x 4.2 x 1
Item Weight: 2.3 pounds
16Port POE Switch*1
Customer questions & answers
Question:Does the bottom of the unit have holds to wall mount with screws?
Answer:Yes can mount in multiple directions
Question:My download speed went from 700mbps with my old switch to 138mbps with this device. i am only using 1 uplink connection from my router. any ideas?
Answer:If any portion of the network from sender to receiver is wireless & uses existing wireless networking technologies, your question can't be answered.
Else if, the entire is wired but uses existing wired networking technologies, your question can't be undisputedly or convincingly answered.
Else if, the entire is wired, uses known existing wired networking technologies, & the connection from sender to receiver has not changed in ANY way; cabling, networking topologies, any device HW or SW, security, etc., an answer to your question can be convincingly argued.
Question:Can I control the PoE per port? or is it automatic?
Question:What is the maximum output power of the whole switch and the output power of a single port?
Answer:30w per port 300 w total
Question:Is it rack mountable?
Answer:It does not come with any mounting brackets. However, II have attached thes to phone charging stands, tool boxes, etc using 3M automotive two-sides tape and that works great.
Question:My ubiquity units can use both af and at, but if this device also supports both, so how can i confirm it's prioritizing the higher 48volt at standard?
Answer:I don't know the answer, but I would hope that if the device has more functionality at the higher voltage, then it would negotiate for it. If not, then do you care? If you have a POE tester, then use it.
Question:Will this automatically adjust output voltage? i have security cameras that require 19v poe and the oem poe's are no longer available.
Thanks for your question.
Sorry but our POE switch can't automatically adjust output voltage; our POE switch is of standard POE, it is with standard POE protocol; your camera has to be standard POE camera.
If you have any questions, please feel free to email us, we will respond as expeditious as possible.
Question:Does this have a CLI interface or a console port in the back?
Answer:No. There’s no GUI it’s a regular switch
Question:what is the part number or description for the fiber connection on this switch?
Answer:I use cat 5 or cat 6 cable to connect to the NVR and router
Question:Is this poe rack mountable?
Answer:The images doesn't show any rack mount brackets, but the switch has the place for brackets. Also it's not mentioned in description that this switch is Rack mountable or not.
Warranty & Customer Service
Email: firstname.lastname@example.org (reply in 24 hours.)
Phone: +1 (352) 900-4656 (Eastern time Monday-Friday 9:00am-5:00pm)
Warranty for 1 year from Date of Purchase