 |
 |
 |
|
Auto Detect Device
|
Brilliant PoE Power Supply
|
Full Gigabit High Speed
|
Overload Protection
|
Automatically identify PoE devices used for power supply without damaging non-PoE devices. |
Automatically identify PoE devices used for power supply without damaging non-PoE devices.
|
OOSSXX PoE switches are designed and developed to meet PoE power requirements.
|
The PoE port supports a priority power supply mechanism. When the remaining power is insufficient, the power supply of the high-priority port is used first to prevent equipment overload and ensure long-term safety and stable operation.
|
When the port is connected to a non-POE device that does not require power, the power of the port can be automatically turned off, which can protect the non-POE device from damage.
|
It complies with the IEEE 802.3af / at PoE power supply standard, and has higher compatibility. It can supply power to all PoE devices that support this standard.
|
They use high-power industrial power supplies, the latest high-speed Ethernet switching chips, ultra-high backplane bandwidth design, extremely fast data processing capabilities, and can support stable and reliable power supplies and smooth data transmission.
|
|
All ports support auto-flip and self-negotiation. |
The maximum PoE output power of the entire switch is 150W, and the maximum PoE output power of a single port is 30W, which can support more high-power devices, such as high-power IP cameras, wireless APs, and thin clients.
|
|
|
 |
8 PoE+ Ports - Max Total PoE+ Power of 150W
Assign a total of 150W PoE+ power across all ports based on the device connected. If connecting eight cameras requiring 15.4W each, 150W power will be split equally to 8 ports.
|
 |
2 Uplink Ports
The PoE+ has an extra uplink port, making network setups easier and more convenient. With one uplink port connected to the router, the other uplink can be connected to another PoE+ switch, a NVR, or any non-PoE+ equipment, allowing you to save a port on your main router / switch.
|
 |
High Power PoE+ Port on Port 1
The PoE+ features a special design with Hi-PoE+ on port 1, allowing up to 150W of PoE+ power on a single port - ideal for high power devices such like IP PTZ cameras. Note: Total power of all 8 ports cannot exceed 150W.
|
 |
Independent Port
PoE ports are independent of each other, and isolated from each other, which can suppress broadcast storms and make network equipment more secure.
|
 |
 |
 |
Fanless Design
|
US-based Service
|
Toll-free Tech Support
|
Built to high heat tolerances, the switch provides reliable power without making a noise. |
In addition to the 30-days no-questions-asked refund policy, we also offer a US-based standard service that covers replacement.
|
Our technicians are ready to help at our customer support, 9:00AM to 5:00PM Eastern time Monday to Friday, and via Amazon message during after-hours and weekends.
|
This PoE switch provides power and connectivity for Wireless APs, IP Cameras, VoIP phones and other PoE devices. The gigabit ethernet switch support IEEE802.3af/at, advanced sensing algorithm, for the terminal device which support the IEEE802.3af/at power over Ethernet POE standard, New automatic detection protection technology inside, don’t worry about damage to private standard POE or non-POE devices. Automatic detected and recognition of POE demand, speed, duplex and Uplink cable, simple and convenient, without configure, plug and play
Port Configuration: 8 POE ports at 10/100Mbps each, making network setups easier and more convenient.
Multi-function installation
Supports desktop or wall mount placement
Low Noise
Fanless design means zero added noise no matter where it is installed, making it the number one choice for noise sensitive environments
Note: This product requires power, and provide power for PoE devices.Do not support passive PoE device
Parameter
Port of RJ45: 11 port·POE Port: 8 port ·
Port type: RJ45 adaptive ·
Port rate:10/100/1000M ·
Cable type: CAT5 or better·
Backplane Data bandwidth: 1.8GB·
Transfer mode: Full-Duplex or Half-Duplex adaptive·
Addressing: 48 bit MAC address·
Mac Address Table: 1K·
Network delay: 100Mbps, less than 20ms under 64byte frame·support IEEE802.3af/at·
Single port: 15.4W/30W·
Max Power:150W Serials·
Maximum power distance with CAT5 UTP;100meters.·AC 110V-230V·11 * 5.9 * 1.8 inch
Product Information
Brand:OOSSXX
Manufacturer Part Number:OSX-JHJ802-022
Product Dimensions: 6 x 4 x 2 inches
Item Weight:2.84 pounds
Package Includes
8Port POE Switch*1
Cable*1
User Manua*1
Customer Questions & Answers
Question:Does the bottom of the unit have holds to wall mount with screws?
Answer:Yes can mount in multiple directions
Question:My download speed went from 700mbps with my old switch to 138mbps with this device. i am only using 1 uplink connection from my router. any ideas?
Answer:If any portion of the network from sender to receiver is wireless & uses existing wireless networking technologies, your question can't be answered.
Else if, the entire is wired but uses existing wired networking technologies, your question can't be undisputedly or convincingly answered.
Else if, the entire is wired, uses known existing wired networking technologies, & the connection from sender to receiver has not changed in ANY way; cabling, networking topologies, any device HW or SW, security, etc., an answer to your question can be convincingly argued.
Question:Can I control the PoE per port? or is it automatic?
Answer:It’s automatic
Question:What is the maximum output power of the whole switch and the output power of a single port?
Answer:30w per port 300 w total
Question:Is it rack mountable?
Answer:It does not come with any mounting brackets. However, II have attached thes to phone charging stands, tool boxes, etc using 3M automotive two-sides tape and that works great.
Question:My ubiquity units can use both af and at, but if this device also supports both, so how can i confirm it's prioritizing the higher 48volt at standard?
Answer:I don't know the answer, but I would hope that if the device has more functionality at the higher voltage, then it would negotiate for it. If not, then do you care? If you have a POE tester, then use it.
Question:Will this automatically adjust output voltage? i have security cameras that require 19v poe and the oem poe's are no longer available.
Answer:Hi
Sorry but our POE switch can't automatically adjust output voltage; our POE switch is of standard POE, it is with standard POE protocol; your camera has to be standard POE camera.
If you have any questions, please feel free to email us, we will respond as expeditious as possible.
Question:Does this have a CLI interface or a console port in the back?
Answer:No. There’s no GUI it’s a regular switch
Warranty & Customer Service
Email: info@oossxx.com (reply in 24 hours.)
Phone: +1 (352) 900-4656 (Eastern time Monday-Friday 9:00am-5:00pm)
US Location Service, Warranty for 1 Year from Date of Purchase, 30 Days Return Free.